Black pull-out tap from Buster & Punch with cross pattern

The English company Buster & Punch is known for its high-quality products. They now also have mixers in their range that fit perfectly with their linear or cross-cut furniture and door fittings.

This item concerns a black kitchen tap with a handle mixer tap with a pull-out spray head. The pull-out spray head and handle are cross-ground, which is typical of Buster+Punch. This faucet is cast, sandblasted and milled in Italy from solid stainless steel. The characteristic cross-cut serrated pattern is then very finely finished by hand.

The crane with a total height of 372 mm comes forward in total 261 mm. The cross-cut handle has a length of 104 mm.

This black mixer tap has a subtle acid-etched B+P logo and is supplied per piece with mounting.

Maximum thickness of the mounting surface is 40mm (fixings included).

Minimum recommended water pressure: 0.5 Bar (7.25 psi)

Maximum recommended water pressure: 5.0 Bar (72psi)

Recommended maximum temperature: 70° (158° F)

Recommended temperature range: 5°-60° (41°-140°F) Exceeding these temperatures may result in damage to the faucet. With very high water pressure it may be necessary to fit a pressure reducing valve.

All Buster + Punch taps comply with the EN817 standard. The mixer taps have been tested to work with a Max. pressure of 10 Bar (1000 kPa) The recommended working pressure range is 1.0 to 5.0 Bar (100 kPa-500 kPa). If local housing regulations dictate otherwise, we recommend consulting a certified plumber.